How to store a 13inch FPV drone for a long time?

Hey there, fellow FPV drone enthusiasts! I'm a supplier of 13 - inch FPV drones, and I know how important it is to store your precious drone properly, especially if you're not going to use it for a long time. In this blog, I'll share some tips on how to store a 13 - inch FPV drone for an extended period, so it stays in top - notch condition when you're ready to fly again.

1. Clean Your Drone Thoroughly

Before you even think about storing your 13 - inch FPV drone, you gotta give it a good clean. Flying these drones can get them dirty, with dust, dirt, and even some grime from the environment sticking to them. Start by using a soft brush, like a paintbrush, to gently remove any loose debris from the frame, propellers, and motors. You can also use compressed air to blow out any dust that might be hiding in the nooks and crannies.

For a more thorough clean, dampen a microfiber cloth with a little bit of mild soap and water. Wipe down the entire drone, being careful not to get any water into the electronic components. Make sure to dry it completely with a dry cloth. This step is crucial because dirt and moisture can cause corrosion and damage to the drone's parts over time.

FPV Drone With Head Tracking Mode suppliers

2. Remove the Batteries

Batteries are the lifeblood of your FPV drone, but they can also be a problem if left in the drone during long - term storage. Lithium - polymer (LiPo) batteries, which are commonly used in FPV drones, can self - discharge over time. If they're left in the drone and fully discharged, they can become damaged and even pose a safety risk.

So, take out the batteries from your 13 - inch FPV drone. Store them in a fireproof LiPo bag at a proper storage charge level. For most LiPo batteries, this is around 3.8V per cell. You can use a LiPo charger with a storage mode to achieve this. Keep the batteries in a cool, dry place away from direct sunlight and heat sources.

3. Protect the Propellers

The propellers of your 13 - inch FPV drone are delicate and can easily get bent or damaged during storage. To prevent this, remove the propellers from the drone. You can use a propeller removal tool to do this safely. Once removed, store them in a propeller case or a small container. This will keep them from getting crushed or warped.

If you don't have a propeller case, you can also use a piece of foam or soft material to wrap them individually. This will provide a cushion and protect them from any impact.

4. Disassemble if Necessary

Depending on the design of your 13 - inch FPV drone, you might want to consider disassembling it for storage. Some drones have parts that can be easily removed, like the camera, antenna, or the flight controller. Disassembling the drone can make it easier to store and also reduce the risk of damage to these sensitive components.

When disassembling, make sure to keep all the parts organized. You can use small plastic bags to store screws, nuts, and other small parts. Label each bag so you know where each part belongs when it's time to reassemble the drone.

5. Choose the Right Storage Location

The location where you store your 13 - inch FPV drone is just as important as the steps you take to prepare it for storage. You want to find a place that's cool, dry, and free from dust. A closet or a storage cabinet can be a good option.

Avoid storing the drone in places where the temperature fluctuates a lot, like an attic or a garage. Extreme temperatures can damage the electronic components of the drone. Also, keep it away from areas where it might be knocked over or stepped on.

6. Use a Protective Case

Investing in a good protective case for your 13 - inch FPV drone is a smart move. A hard - shell case with foam inserts can provide excellent protection during storage and transportation. The foam inserts can be customized to fit the shape of your drone and its parts, keeping everything in place and preventing any movement that could cause damage.

There are many different types of cases available on the market. You can choose one that suits your needs and budget. Some cases even come with compartments for storing batteries, propellers, and other accessories.

7. Check on Your Drone Regularly

Even if you've taken all the right steps to store your 13 - inch FPV drone, it's still a good idea to check on it regularly. Every few months, take the drone out of storage and give it a quick inspection. Look for any signs of damage, corrosion, or mold.

Check the batteries to make sure they're still at the proper storage charge level. If necessary, recharge them to the storage level. This regular check - up will help you catch any potential problems early and ensure that your drone is ready to fly when you are.

Now, if you're interested in getting a new 13 - inch FPV drone or looking for some great accessories, we've got some awesome products for you. Check out our FPV Drones Kit for Training, which is perfect for beginners. If you're into more advanced features, our FPV Drone with Head Tracking Mode and FPV Drone with Coach Mode are definitely worth a look.

If you're thinking about making a purchase or have any questions about our products, don't hesitate to reach out. We're always here to help you find the perfect FPV drone for your needs. Whether you're a hobbyist or a professional pilot, we've got something for you.